Teledyne Hastings is proud to announce the release of the THCD-101 single channel power supply, controller and display. The THCD-101 can be used to operate a wide variety of mass flow meters and controllers as well as vacuum gauges and pressure transducers. The THCD-101 uses bright OLED digits which makes the display easy to view, even from a distance. The THCD-101 is extremely versatile in its configurable range and can be set up to display any unit of measurement through customizable alphanumeric characters. The power supply provides stable ±15 VDC and +24 VDC levels which can be used to operate a variety of measurement and control instruments. The display and readout features a high accuracy of ±(0.02% of Reading + 0.01% of Full Scale). The user can also set relay alarms for the control of other processes. The THCD-101 is configured at the factory to match the user’s requirements for range & units so it is ready to use right out-of-the-box.
The main screen of the THCD-101 display (pictured above) shows the current reading from the connected instrument and measurement units. If relay alarms have been tripped, they will be indicated on the far right of the display screen. Lastly, the main screen will show the current mode of the setpoint, if not in AUTO mode. There is an OPEN mode and CLOSED mode. In OPEN mode the setpoint outputs a voltage greater than the full scale of the device. In CLOSED mode the setpoint outputs a voltage less than the minimum output voltage of most devices. AUTO mode is dependent on the set point the user commands via either the THCD-101 physical buttons, digital communication, or external input.
The menus pack several features into the THCD-101 while still ensuring ease of operation for the user. Through the intuitive menus, the user can enter a setpoint, change the full-scale range & full-scale output voltage (5 VDC or 10 VDC), program alarm relays for process control, restore factory defaults, and many other helpful options.
The THCD-101 now includes digital communication via a USB ‘C’ connection or Ethernet (TCP/IP). When the power supply is connected via Ethernet, the THCD-101 provides a web server for operation and instrument configuration. The web server can be accessed by entering the IP address of the device into a browser address bar (requires static IP address configuration on the network prior to use). This allows the user control of various settings within the device and to read the devices current reading. Note that the IP Address can be changed through the menus of THCD-101. In addition to the THCD-101 web server, standalone DisplayX software can be downloaded free of charge from the Teledyne Hastings website. Should the user need to change the THCD-101’s setup, the DisplayX software or Ethernet web server is extremely helpful in streamlining this process.
As outlined above, the THCD-101 contains all the great features of the legacy THCD-100 while adding new and improved features such as USB & Ethernet digital communications and a bright OLED display. Even with these powerful additions, the instrument keeps the same 1/8 DIN size while offering a shorter depth than the previous display & readout!
The THCD-101 is a very flexible and multi-featured process display controller that is capable of interfacing to an assortment of meters, controllers, and gauges. To learn more about the THCD-101 or any of our other vacuum and flow products, contact us at email@example.com, call 757-723-6531 (800-950-2468), or click the button below.