Introducing our Newest Product - THCD-401 4-channel power supply

Teledyne Hastings is proud to announce our newest 4-channel power supply, controller and display, the THCD-401. The THCD-401 provides both ±15 VDC or 24 VDC to power our mass flow controllers, flow meters, vacuum gauges and pressure transducers. Feedback from connected devices is displayed on the bright, front panel LED display in 6-digit resolution, making open and closed channels easily identified at a glance. The THCD-401 can set a relay point for control of other processes and has a high accuracy of ± (0.02% of Reading + 0.01% of Full Scale). Custom configuring our products to customer needs is our specialty. Your THCD-401 can be factory configured to match the gas, range, units and the output of your instruments for out-of-box functionality.

What’s Improved?

In short, the THCD-401 was designed for exceptional user access and control.  The addition of a circular touch pad simplifies navigation through the unit’s various menu options, while left and right arrow keys allow easy selection of digits to be changed. Calibration is no longer needed for various levels of input voltage and built-in fuses provide additional surge protection.  Back panel communication ports have been streamlined and a USB-C and Ethernet port for serial communication have been added. 

The addition of Ethernet communication provides access to the newest feature that the THCD-401 has to offer; the internal web server! The web server can be accessed by entering the IP address of the THCD-401 into a browser’s address bar (requires static IP address configuration on the network prior to use). While the web server feature works best in Mozilla™ Firefox^®, it can be accessed via any browser you choose.  Figure 2 shows the web server interface with applications along the top navigation bar and a live data stream for remote read.

The web server allows you to name channels and adjust the range or units based on your device and the full scale (V) voltage output that it sends. This enables users to see the flow rate of a flow controller or meter, as well as the ability to OPEN/CLOSE all channels at the click of a button. Other applications include linearization, setting of a relay point and finding the total amount of gas that has passed through the device using the totalizer function.

It should be noted that while all these advanced features are available via the web server (Ethernet) connection, the THCD-401 also offers direct access to each via the front panel display menus using the circular touch pad.  This allows for quick and convenient setup of the channel’s full scale and range(V) for new devices.

If a relay point has been tripped, it will be indicated to the left of the channel’s name on the THCD-401 display. The display will also show the current mode of the set point, if it is not configured in AUTO mode. In OPEN mode, the set point outputs a voltage greater than the full scale of the device. In CLOSED mode the set point outputs a voltage less than the minimum output voltage of most devices. AUTO mode is dependent on the user defined set point configured through the THCD-401 physical buttons, digital communication or external input. 

More Information:

The THCD-401 was designed to be a highly flexible and multi-featured process display controller that can be panel mounted and capable of interfacing to an assortment of meters, controllers and gauges.  A powerful upgrade from the previous THCD-400 model, the THCD-401 adds digital communications, a bright LED display and a variety of customizable options to an already time-tested platform. To learn more about the
THCD-401 or any of our other vacuum and flow products, contact us at hastings_instruments@teledyne.com, call 1-800-950-2468, or click the button below.