Have questions? Need Help?
757.723.6531 | 800.950.2468

Teledyne Hastings Instruments Blog

See more clearly with the HVG-2020A Vacuum Gauge!

Posted by Stuart Taliaferro

Tue, Oct 09, 2018 @ 10:02 AM

HVG 2020A_76307_fingerWe at Teledyne Hastings Instruments are pleased to introduce the newest member of our vacuum measurement portfolio, the HVG-2020A.  The HVG-2020A is a piezoresistive vacuum sensor with an optional touchscreen display that reads from 0.1-1000 Torr.  The sensor uses 316 Stainless Steel as the wetted material and provides a gas independent pressure measurement, meaning your measurement will be accurate no matter what gas species is being used.  The HVG-2020A features an excellent accuracy rating of ±(0.1% of Reading + 0.5 Torr).  This rugged sensor comes in a number of system connections for ease of installation: 1/8” NPT, 1/4” VCR®, 1.33” Mini-CF, 2.75” CF, KF-16, KF-25, 1/2” Weld Stub, and 1/2” VCR. Let’s talk about some of the powerful features that allows the HVG-2020A to stand out.

5 Reasons Why You  Need the HVG-2020A

HVG 2020A_topAnalog I/O: The HVG-2020A has a 9 pin D-sub connector on top of the assembly that allows an analog output signal to be measured amongst other features.  The selected linear analog output signal is proportional to the full scale range of the sensor (1000 Torr). Available outputs are 0-1 VDC, 0-5 VDC, 0-10 VDC, 0-20 mA, and 4-20 mA.  The sensor will come configured from the factory with one of these outputs active, but can be easily changed by the user should output requirements change.  Through the touchscreen display, there is a menu that allows the user to cycle through the available output options.  If the HVG-2020A was configured without a touchscreen, the analog output can be changed via digital communications, which we’ll talk about in the next section.  In addition to the analog output, the 9 pin D-sub will have Hi & Lo set points.  The Hi set point is active when the pressure is above the set value and the Lo set point is active when the pressure is below the set value.  Finally, the 9 pin D-sub has a pin for input power.  The HVG-2020A can accept 12-36 VDC for power.  In the event, the user doesn’t have 12-36 VDC to send via the 9 pin D-sub, there’s a 24 VDC input connection port that’s compatible with a bayonet-style power supply.

 

Digitial I O for HVG 2020ADigital I/O:  As mentioned earlier, the HVG-2020A has a few different methods digital communication can be established.  First and easiest is the micro-USB port on top of the gauge.  This will allow the instrument to be directly connected to a computer without the need for adapters or extra wiring.  There is also a 4-conductor TRRS jack on top of the instrument.  This port can be used for daisy-chaining gauges together with RS485 or a standard RS232 communication connection.  Finally, the 9 pin D-sub will have two pins designated for TTL serial communication. These digital communications (with the exception of TTL) can be connected to a PC and used with our Free Windows software for the HVG-2020A.  The software has a number of features including data logging and customization/configuration of the gauge.  Digital communication also allows for command syntax to be sent manually to the instrument. These commands are especially important if the HVG-2020A was ordered without a touchscreen display.  Through digital communication, the user can issue commands that change the analog output, adjust set point values, stream pressure readings, or change pressure units, just to name a few.

 5 Reasons Why You  Need the HVG-2020A

Touchscreen Display:  The most powerful feature of the HVG-2020A is the touchscreen display.  The intuitive display allows for quick visualization of the current pressure without needing to have a separate power supply or remote display. There are five available views to choose from (shown left to right below): Pressure View, Pressure & Temperature View, Set Point View, Bar Graph View, and Pressure over Time View.  The pressure is always displayed on each of these five screens.

Various Digital Screens for HGV 2020A

There is also a menu button which will allow the user to cycle through a number of sub menus.  Through these menus the user can change the screen orientation should they mount the gauge in a position other than vertical, set the zero (this should only be performed if the system pressure is known to be well below 0.1 Torr), view device information such as serial number and firmware levels, change the analog output, cycle between RS232 or RS485 and a number of baud rates, and finally restore the configuration of the gauge back to the original factory setup.  The touchscreen display makes reading vacuum pressure as clear as 20/20 Vision!

 

LED Status Lights:  Lastly, the HVG-2020A features two LED lights on top of the instrument.  These are extremely helpful in getting a general idea of the current pressure and status of the vacuum gauge. The chart below explains each combination of Status & Vacuum LED.

Status and Vacuum LED Explanation

Simple Lab Set-up using Diaphragm Vacuum Pump

The HVG-2020A vacuum gauge is ideal for many applications requiring rough vacuum measurement.  The picture on the right shows a simple lab set-up using a diaphragm vacuum pump & an analog needle gauge.  The HVG-2020A would be a perfect fit for this set up.  With the local touchscreen display, extensive wiring and configuration is not needed.  Simply supply the gauge power and you are reading pressure. It’s easy to See why the “2020” is the vacuum gauge for the job! 

 

To learn more about the HVG-2020A or any of our other vacuum and flow products, contact us at hastings_instruments@teledyne.com, call 757-723-6531 (800-950-2468), or click the button below.

5 Reasons Why You  Need the HVG-2020A 

VCR® is a registered trademark of Swagelok Company.

Topics: vacuum gauges